Shuttle Block Pump

SPECIFICATIONS:-

• FLOW                  : UP TO 500 LPM 
• PRESSURE         : UP TO 8 BAR
• TEMP.                 : UP TO 100 C
• VISCOSITY        : UP TO 2000 CST
• RPM                   : UP TO 1000 RPM
• SIZE                   : UP TO 3”

DRIVE:-

• BUILT IN GEAR BOX, V - BELT DRIVE & DIRECT DRIVE

APPLICATIONS:-

BITUMEN, CAUSTIC SODA, CHOCOLATE, CORN SYRUP , COAL , CASTOR OIL , CRUDE OIL, ENAMEL, EDIBLE OILS, FUEL OIL ,LDO , LAMINATE, GREASE, KEROSENE, LUBE OIL, MOLASSES, , PALM OIL, PAINT, PETROLEUM, INK, RESIN , SOAP , STARCH , SUGAR SYRUP, TURPENTINE, VARNISH, WAX, FUEL OIL TRANSFER, LOADING AND UNLOADING, EDIBLE OIL TRANSFER PROCESS PLANT ETC….

WORKING PRINCIPLE :

The principle of the SHUTTLE BLOCK Pump incorporates the pump casing, the rotor, the piston, and the shuttle. The rotor is a liquid-tight fit within the casing, with the piston and shuttle being equally liquid-tight in their fit to each other and to the rotor. In operation the piston slides back and forth in the rotor slot and discharging from the opposite end. At the same time the shuttle slides back and forth within the piston slot (picture), the reciprocating piston action is accomplished by the center bearing of the shuttle which rotates on a shuttle pin eccentric to the rotor shaft. Shaft sealing is normally Gland Packing but Mechanical Seal Can also be provided.